Common Flooring Challenges
Traditional flooring solutions often fail under demanding conditions, leading to frequent repairs, safety hazards, and operational disruptions.
Abrasion & Wear Damage
High foot traffic and heavy machinery cause rapid deterioration of conventional flooring, requiring frequent maintenance and replacement.
Chemical Spill Damage
Industrial chemicals, oils, and solvents degrade flooring surfaces, creating safety hazards and unsanitary conditions in critical environments.
Cracks from Structural Movement
Temperature changes and building settlement cause cracks that compromise floor integrity, aesthetics, and create tripping hazards.
Unhygienic Surfaces
Porous flooring materials harbor bacteria, mold, and allergens, creating health risks in sensitive environments like healthcare and food processing.
Long Downtime
Traditional flooring installations require extended curing times, disrupting operations and causing significant revenue loss during installation.
Poor Chemical Resistance
Most flooring materials cannot withstand exposure to harsh chemicals used in industrial, pharmaceutical, and healthcare settings.
StarShield Star PU Flooring
A revolutionary nanotech-enhanced polyurethane flooring solution engineered for maximum durability, protection, and performance
Advanced Nanotech-Enhanced Flooring System
Protect your assets with next-generation nanotech coatings that combine intelligent formulation with superior performance.
StarShield Star PU Flooring is an advanced 2-component polyurethane-based flooring system enhanced with nanotechnology for exceptional flexibility, abrasion resistance, and chemical protection. Its elastomeric properties enable superior crack-bridging and long-term durability in demanding environments.
This high-performance solution provides excellent elasticity and enhanced aesthetics for industrial, commercial, and residential surfaces while maintaining the highest hygiene standards with its seamless, non-porous finish.
Key Features & USP
What makes StarShield Star PU Flooring the intelligent choice for demanding environments
Excellent Elasticity
Advanced elastomeric properties allow the flooring to stretch and contract with temperature changes and structural movement, preventing cracks.
Chemical Resistance
Withstands exposure to oils, solvents, acids, and alkalis commonly found in industrial, pharmaceutical, and healthcare settings.
Crack Bridging
Can bridge substrate cracks up to 2mm, preventing them from reflecting through to the surface and maintaining structural integrity.
Seamless & Hygienic
Creates a completely seamless surface with no joints or crevices where bacteria, mold, and dirt can accumulate, ensuring hygiene compliance.
Quick Curing
Reduces operational downtime significantly with fast drying times between coats and quick return to service, minimizing disruption.
Abrasion Resistant
Withstands heavy foot traffic, wheeled carts, and equipment movement without showing signs of wear, maintaining appearance and performance.
Benefits & Solution
StarShield Star PU Flooring provides comprehensive, intelligent solutions to your most demanding flooring challenges
Key Benefits
- Prevents damage from abrasion, chemical spills, and impacts with nanotech-enhanced formulation
- Bridges cracks caused by structural movement and temperature fluctuations
- Creates a hygienic, seamless surface that's easy to clean and maintain
- Quick curing reduces operational downtime and associated costs
- Compliant with strict hygiene standards for sensitive environments
- Enhanced aesthetics with customizable colors and finishes
- Suitable for both interior and exterior applications across industries
- Long lifespan with minimal maintenance requirements for cost efficiency
Technical Specifications
Ready to Transform Your Floors with Nanotech Protection?
Invest in intelligent protection that safeguards your assets while reducing long-term maintenance costs.
SHOP NOWFree technical consultation included
How It Works
The intelligent 4-step process to achieve perfect, long-lasting flooring protection
Surface Preparation
Clean surface thoroughly, profile to CSP 2-3, fill cracks, and check moisture levels to ensure optimal adhesion and performance.
Mix Components
Mix components A & B thoroughly for 2-3 minutes, then allow induction period of 5-10 minutes for complete chemical integration.
Application
Apply by pouring, then spread with squeegee or trowel. Can also use roller or brush in 2-4 coats as per thickness requirements.
Curing
Allow 8-12 hours between coats, 24h before foot traffic, and 5-7 days for full cure and chemical resistance development.
How To Apply
Proper application ensures maximum performance, durability, and return on investment
Application Instructions
- Surface Preparation: Clean thoroughly, profile to CSP 2-3, fill cracks, check moisture content below 4%.
- Mixing: Combine components A & B in correct ratio, stir for 2-3 minutes thoroughly until uniform consistency.
- Induction: Allow mixed material to rest for 5-10 minutes before application for optimal chemical reaction.
- Application: Apply by pouring, then spread with squeegee or trowel. Can also use roller or brush for smaller areas.
- Coats: Apply 2-4 coats as needed, maintaining recommended thickness of 1-2mm total.
- Drying: Allow 8-12 hours drying time between coats at 25°C and 50% relative humidity.
- Curing: Wait 24 hours before light foot traffic, 5-7 days for full cure and heavy equipment use.
Important Precautions
- Always use appropriate PPE (gloves, goggles, mask) during application
- Ensure adequate ventilation during application and curing periods
- Apply only at temperatures between 10°C - 35°C for optimal results
- Avoid application when humidity exceeds 85% to prevent curing issues
- Do not apply in direct sunlight or on hot surfaces above 40°C
- Keep away from open flames and heat sources during application
- Store in cool, dry place away from children and direct sunlight
- Clean tools immediately after use with appropriate solvent
Where To Apply
StarShield Star PU Flooring is versatile enough for diverse applications across multiple industries requiring intelligent protection
Industrial Flooring
Manufacturing plants, warehouses, and industrial facilities requiring durable, chemical-resistant surfaces.
Commercial Kitchens
Restaurants, hotels, and food service areas needing hygienic, easy-to-clean, grease-resistant surfaces.
Healthcare & Pharma
Hospitals, clinics, labs, and pharmaceutical facilities requiring sterile, seamless, chemical-resistant environments.
Auto Workshops
Garages and repair shops needing oil, chemical, and abrasion-resistant flooring for demanding conditions.
Parking Decks
Multi-level parking areas requiring durable, wear-resistant, and waterproof surfaces for long-term performance.
Residential Interiors
Homes, apartments, and residential buildings seeking durable, attractive, and easy-to-maintain flooring.
Cold Storage
Refrigerated warehouses and freezers requiring temperature-resistant, non-slip, and hygienic flooring.
Food & Beverage Processing
Processing plants needing USDA/FDA compliant, easy-to-sanitize, chemical-resistant flooring.
Product Results
Quantifiable benefits and performance metrics of StarShield Star PU Flooring
Years Durability
Minimum expected lifespan with proper application and maintenance under normal conditions.
Crack Bridging Capacity
Can bridge substrate cracks up to 2mm without affecting surface integrity or appearance.
Foot Traffic Ready
Light foot traffic possible just 24 hours after final coat application, minimizing downtime.
Humidity Resistance
Can be applied in environments with up to 85% relative humidity without affecting performance.
Seamless Finish
Creates completely seamless surface with no joints, gaps, or crevices for optimal hygiene.
Year Warranty
Comprehensive warranty against manufacturing defects and premature performance failure.
Case Studies & Testimonials
Hear from satisfied customers who have transformed their spaces with StarShield intelligent protection
Extra Features
Additional intelligent benefits that make StarShield Star PU Flooring the complete protection solution
Customizable Colors
Available in a wide range of colors to match your brand identity, safety coding, or design preferences.
Slip-Resistant Options
Can be formulated with anti-slip additives for enhanced safety in wet areas or inclined surfaces.
Easy Maintenance
Simple cleaning with mild detergents and routine maintenance keeps floors looking new for years.
Thermal Stability
Maintains performance across a wide temperature range from -40°C to 100°C without cracking or softening.
Impact Resistance
Withstands dropping of heavy objects without cracking, denting, or permanent deformation.
Low VOC Formulation
Formulated with low volatile organic compounds for better indoor air quality and environmental responsibility.