Star Heat Shield for Car

It is a thin film Heat Resistant, Solar Reflective coating that is applied to glass surfaces to provide protection against heat, UV rays, and IR radiation.

It provides IR & UV resistance, helping to prevent heat rays to enter the glass surface. It also helps to improve the efficiency of lighting fixtures and other equipment by reducing heat buildup.

No, Star Heat Shield is compatible to the glass surface & does not any difference in the visibility of the Glass.

After applying Star Heat Shield you will observe an approximate reduction of 21.4 degrees celsius in surface temperature.

Yes, This Heat Reflective Coating can be easily applied on any glass including window glass, door glass, office glass, or curved glass, etc.

This Heat Reflective Coating can be applied after proper cleaning of the glass surface in optimal temperature & weather conditions. Apply using DIY kit. Follow the instructions given in the manual. For reference you can check here: https://www.youtube.com/watch?v=Hwa5sMxkGQ0

The coating should be stored in a cool, dry place, away from direct sunlight and heat. The container should be kept tightly sealed to prevent moisture or air from entering.

coating is primarily designed for use on glass surfaces, but it may be suitable for use on other mate. The rials depending on the specific product and the intended application. It is important to follow the manufacturer's instructions and recommendations for the specific product being used.

The coating helps to reduce heat buildup in lighting fixtures and other equipment by reflecting IR radiation. This helps to improve the efficiency of the fixtures by preventing heat damage and extending the lifespan of the components.

The durability of the coating can make it difficult to remove once it has been applied. Some products may be removable with solvents or other specialized tools, but it is important to follow the manufacturer's instructions and recommendations for the specific product being used.

The effect of the coating on the appearance of the glass can vary depending on the specific product and application method. Some products may have a slight tint or coloration, while others are virtually transparent. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure the desired appearance.

Most coatings are considered safe for use and are tested for safety and performance. However, it is important to follow the manufacturer's instructions and recommendations for the specific product being used, including any safety precautions and handling requirements.

The cost of the coating can vary depending on several factors, including the specific product being used, the quantity being purchased, and the application method. It is important to compare products and costs to find the best value for your needs.

The suitability of the coating for indoor or outdoor use can depend on the specific product and the intended application. Some products are designed specifically for indoor or outdoor use, while others are suitable for both. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The performance of the coating in extreme temperatures can depend on the specific product and the intended application. Some products are designed to provide excellent protection in high heat environments, while others may be limited in their performance in extreme conditions. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The suitability of the coating for use on tempered or laminated glass can depend on the specific product and the intended application. Some products are designed specifically for use on tempered or laminated glass, while others may not be compatible with these types of glass. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The suitability of the coating for use in high-traffic areas or on glass surfaces that are frequently cleaned can depend on the specific product and the intended application. Some products are designed to be durable and long-lasting, even in high-traffic areas or with frequent cleaning, while others may be more susceptible to wear or damage. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The performance of the coating in varying weather conditions can depend on the specific product and the intended application. Some products are designed to provide excellent protection in extreme weather conditions, such as high heat, intense UV exposure, or heavy precipitation, while others may be limited in their performance in these conditions. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The ability to reapply the coating to the same glass surface can depend on the specific product and the intended application. Some products are designed to be reapplied multiple times, while others may not be suitable for reapplication. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

Star Heat Shield is safe for use and is tested for safety and performance. It is a certified & Patented Product. However, it is important to follow the instruction manual with precautions and handling requirements.

The tools and equipment required for application can depend on the specific product and the intended application. Some products may require specialized tools or equipment for application, while others can be applied using common household tools. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety

The impact of the coating on the appearance of the glass can depend on the specific product and the intended application. Some products are designed to be clear and virtually invisible, while others may have a slight tint or other visible effect on the glass. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The safety of the coating for human and animal exposure can depend on the specific product and the intended application. Some products are designed to be safe for human and animal exposure, while others may contain hazardous materials or chemicals that can pose a risk to health and safety. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The compatibility of the coating with other types of glass treatments or coatings can depend on the specific product and the intended application. Some products may be compatible with other treatments or coatings, while others may not be suitable for use with other products. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The suitability of the coating for use on curved or irregularly shaped glass surfaces can depend on the specific product and the intended application. Some products are designed to be applied to flat or slightly curved glass surfaces, while others may be suitable for more complex shapes. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The lifespan of the coating can depend on the specific product and the intended application. Some products are designed to last for several years, while others may have a shorter lifespan. The lifespan of the coating can also be affected by factors such as weather conditions, exposure to UV light, and maintenance practices.

The resistance of the coating to scratches or impacts can depend on the specific product and the intended application. Some products are designed to be highly scratch and impact-resistant, while others may be more susceptible to damage. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The suitability of the coating for use on both sides of the glass can depend on the specific product and the intended application. Some products are designed to be applied to one side of the glass only, while others may be suitable for use on both sides. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

The resistance of the coating to cleaning agents and chemicals can depend on the specific product and the intended application. Some products are designed to be highly resistant to cleaning agents and chemicals, while others may be more susceptible to damage from these substances. It is important to follow the manufacturer's instructions and recommendations for the specific product being used to ensure optimal performance and safety.

Yes, it can be applied on curved glass surfaces also.

Star Heat Shield is a scratch-stain-resistant coating with strong adhesion properties.

Yes. leave the glass for 24-48 hours for complete drying up of the surface and you can clean it regularly with a dry cloth to remove dirt & dust particles.

Yes, it impacts greatly on the energy consumption by AC. It reduces up to 19.2% of the total air conditioning costs. So, you can save a lot with the comfort of interior.