STAR WATER SHIELD CONCENTRATE

Superhydrophobic transparent penetrating waterproofing compound

Issues

1. Are you tired of having to repeatedly repair and re-waterproof areas due paint peeling, surface cracks, mould and fungus growth caused by dampness?

2. Have you noticed your walls sweating or seeping moisture through after heavy rains despite using traditional waterproofing paint?

Presenting Star Water Shield Concentrate - to achieve a watering structure

Star Water Shield Concentrate - High viscous Water Repellent compound. This advanced eco-friendly solution is formulated with renewable plant extract, ensuring, a non-toxic and sustainable choice for your waterproofing needs. With its ultra-hydrophobic properties and water contact angle of over 130°, Star Water Shield Concrete preserve the original aesthetic of your surfaces.

Not only is Star Water Shield Concentrate is environmental friendly, but it also provides exceptional performance. Its formulation makes it safe for both indoor and outdoor use, even on delicate surfaces. This innovative waterproof compound offers up to 5 years of reliable protection with just a single application, makin it a cost-effective solution that saves on maintenance expenses.

Magical Benefits of Using Star Water Shield Concentrate

  • Water Resistant

    Star Water Shield Concentrate fills the void and capillary pores in concrete making it impervious, water tight and resistant to water ingress even withstands hydrostatic pressure.

  • Low Viscosity

    Star Water Shield Concentrate has deeper penetration due to its low viscous properties, it easily penetrates into the fines of cracks, ensuring thorough filling and pore blocking of concrete.

  • Chemical Resistant

    Concrete injected with Star Water Shield Concentrate becomes impervious, resistant to acid, chemicals, toxic and helps in maintaining a pristine condition of the structure.

  • Corrosion Resistant

    Star Water Shield Concentrate blocks the pores in concrete and also has excellent adhesion to the reinforcement which makes the structure resistant to corrosion. It can also be used in prestressing and post-tensioning application without fear of corrosion of tendons

Packaging

Star Water Shield Concentrate is supplied in 1, 5, 20 litre containers.

Unique Selling Proposition USP

Star Water Shield - Concentrate can be poured onto inaccessible areas such as lift pits, shafts, retaining walls which are hard to access to carry out coating procedures. Its excellent absorption properties allow it to penetrate the surface making watertight and eliminating the need of a coating

Deep Penetration: It can seep into the smallest pores and cracks, ensuring thorough protection.

Hydrophobic Layer: Once applied, they create a barrier that repels water effectively.

Non-Toxic: Suitable for portable water, making them safe for a Varity of applications.

Good Adhesion: It adheres well to most surface, providing a durable protective layer.

Increased Structural Lifespan: By preventing water ingress, it helps maintain the structural integrity of buildings.

Reduces Maintenance: It minimizes the need for frequent repairs and maintenance due to water damage.

Prevention of Mols and Mildew: It keeps surfaces dry, preventing the growth of mold and mildew.

Working Principle

  • This is a waterproofing that penetrates deep into the concrete, by chemical reaction with the base. Penetration goes inside the existing pores and voids, thereby forming a waterproof barrier in it. Deep penetration is what distinguishes penetrating compound from standard waterproofing materials, such as coating, roll and membrane, since they all protect the surface without penetrating deep into element. When penetrating, the penetrating compounds form a kind of integral whole with concrete and, unlike standard insulations, can be destroyed or damaged only when the concrete itself destroyed.

WHERE TO APPLY

    • Inaccessible areas
    • Retaining walls negative side
    • shafts
    • Ramps
    • Concrete
    • Brickbat Coba
    • Cementitious Surface
    • Stones
    • Fibreboards
    • Marble/granite

HOW TO APPLY

  • Surface Preparation

    The surface should be clean, dry, and free of any loose material or contaminants

  • Mixing

    1. Pour Star Water Shield Concentrate into the mixing container and thoroughly mix and stir for at least 2 minutes using a slow speed (300-400 RPM) drill machine attached with a mixing paddle. 
    2. Retempering with water or solvent should not be done.

  • Apply

    Let the first coat dry completely up to 24 hours. This can vary based on temperature and humidity and conditions.Pour Star Water Shield Concentrate onto the surface to be waterproofed.

Certification And Recognition of StarShield

Downloads

  • catalogue

    Catalogue

  • catalogue

    Technical Data Sheet (TDS)

FAQS Related to Star Water Shield Concentrate

1. What Is penetrating waterproof coating?

Specialized formulations of penetrating waterproof coatings are those which seep into the substrate, filling and sealing the pores and capillaries to prevent any water entry.

2. How does Waterproofing Coating work?

When it comes to the Star Water Shield Concentrate Coating, it permeates the surface and forms a protective barrier by reacting chemically inside the material that does not allow either moisture or water pass through.

3. What Surfaces can be treated with penetrating waterproof coating?

This can be use on different surfaces such as concrete, brick, stone or masonry.

4. Is penetrating waterproof coating visible after application?

Most artificial intelligence systems typically clear when they dry and do not change their look at all.

5. How long does penetrating waterproof coating last?

Some such coatings could last for a long time if appropriate conditions are met, while in the meantime others require reapplication sooner due to various reasons.

6. Can penetrating waterproof coating be used on interior walls?

Certainly, external and internal walls can both benefit from its use as a way of preventing damp.

7. Does penetrating waterproof coating prevent mold and mildew?

Inhibiting the growth of mold and mildew on treated surfaces is possible because it prevents moisture penetration.

8. Can I apply paint over penetrating waterproof coating?

Certainly, once waterproof coatings are completely dry, they can be painted over.

9. How do I prepare the surface for application?

Before you put on the paint, make sure to clean the surface. This means that the surface must be dry in addition to being free from anything loose including dirt or rust.

10. Can penetrating waterproof coating be applied in wet conditions?

These are the best practice during a dry period but there are exceptions when they can also work with moisture present on the materials being treated.

EXPERT HELP