No, it does not require any special training. You can simply spray and apply after properly cleaning the surface. The process is designed to be user-friendly for both DIY enthusiasts and professionals.

The application process itself is relatively quick. For a standard window, it takes about 15-20 minutes to apply. The coating then needs 24 hours to fully cure and develop its protective properties.

Star Glass Shield components should be mixed in a 9:1 ratio - 9 parts base (Component A) to 1 part hardener (Component B). It's important to mix thoroughly to form a homogenous mixture before application.

The glass surface must be thoroughly cleaned with a glass cleaner to remove all dust, dirt, and stains. Ensure the surface is completely dry before application. Any existing coatings or treatments should be removed for best results.

Yes, Star Glass Shield is ultra hydrophobic, which means it causes water to bead up and roll off the surface. This prevents water from sitting on the glass and forming stains, keeping your glass surfaces stain-free.

Star Glass Shield forms a strong bond with the glass surface, creating a transparent and durable nano-layer that acts as a barrier against external elements. The coating modifies the surface tension of the glass, making it hydrophobic and oleophobic (repelling both water and oils).

No, Star Glass Shield is designed to be completely transparent, allowing for optimal visibility through the coated surface. It does not distort or impair vision when applied correctly. In fact, it can improve visibility during rain due to its water-repellent properties.

Star Glass Shield provides an additional protective layer that helps guard against minor scratches and abrasions from daily wear and tear. While it doesn't make glass completely scratch-proof, it significantly increases resistance to scratching.

Yes, Star Glass Shield contains UV stabilizers that help protect the glass from ultraviolet degradation. This prevents the glass from becoming brittle or discolored over time when exposed to sunlight.

Star Glass Shield is designed to be long-lasting, but it is not permanent. The coating typically lasts for 2+ years depending on environmental conditions and surface wear. Over time, the effectiveness may diminish, and reapplication may be required to maintain optimal protection.

Surfaces coated with Star Glass Shield can be cleaned using mild soapy water and a soft cloth or sponge. Avoid using abrasive cleaners, rough materials, or harsh chemicals that could potentially damage the coating. The hydrophobic properties actually make cleaning easier as dirt and grime have less adhesion to the surface.

Yes, Star Glass Shield can be removed from surfaces using specialized glass cleaning solutions or mild abrasive cleaners. For complete removal, professional assistance may be recommended to ensure the glass surface isn't damaged during the process.

Under normal conditions, Star Glass Shield provides protection for 2+ years. The need for reapplication depends on factors like environmental exposure, cleaning frequency, and surface wear. You'll know it's time to reapply when water no longer beads up effectively on the surface.