Star Cool Shield
Star Cool shield is a heat reflective and insulating coating that reflects up to 97% of sun rays and diminishes the heat which in turn keeps the roof cool and reduces Air Conditioning cost by up to 19.2 %
Worrying about increasing AC bills?
ChooseThe Surfacefrom where you want to reduce heat
Looking to reduce heat?Keep yourself Cool by Choosing the right surface from where you want to reduce the heat. Click the required surface below to gain the experience.
6 MAGICAL BENEFITS OF USING STAR COOL SHIELD
-
REDUCED AIR CONDITIONING COST BY UP TO 19.2%
Star Cool Shield reflects up to 97% of sun rays and dwindles the heat which in turn keeps the ambience cool and reduces air conditioning cost
-
HIGH ON QUALITY, LOW ON COST
Star Cool Shield covers 10% more area than any other similar coatings & hence will be lighter on your pocket. It is lightweight & has nanocomponents that makes its quality better.
-
ENERGY EFFICIENCY
Reduction in temperature, by up to 8.5°C, enhances efficiency and productivity and contributes to generate better results with increase in comfort.
-
WATER ABSORPTION
Star Cool Shield has a 0.98% water absorption rate, which is the lowest and makes it capable of sustaining a pressure of 2.5 bar for 7 days.
-
HIGH PAYBACK
Amount spent on Cool Shield Paint is reflective paid back within very less time by the decrease in energy bills. Heat coating causes less pressure on AC & consequently decreases your AC bills.
-
ENHANCE THE LIFETIME OF ROOF
Star Cool Shield offers exterior durability and UV resistance along with better mechanical strength & helps to protect the roof from degradation due to weathering, i.e., it protects from heat, water & dust. This reduces maintenance requirements & extends life.
Reduce the surface temperature by up to 25°C.Saves air conditioning costs by up to 19.2%.8+ years long life with Star Paint Shield +
How it Works...
-
Unlike other roof coatings, Star Cool Shield not only rejects solar heat but also adds insulating additives and Nano-Air Bubbles that act as a barrier against heat and increase the cooling effect. Thus, providing extra cooling.
-
PERFORMANCE CALCULATION
TREMENDOUSLY REDUCES ROOM TEMPERATURE BY 25°C & AMBIENT TEMP. BY 8.5° C
Reduced Air Conditioning cost by up to 19.2 %
-
-
As Star Cool Shield reflects up to 97%, thus it reduces the heat penetration from the roof, keeping the interior cool & comfortable, which in turn reduces the load & cost of air-conditioning as it would require less energy.
CASE STUDY
-
-
- Around 1 Lakh Visitors
- Gurudwara
- Floor Temperature : 75°C
- Adhesive
- Self-Cleaning
It was difficult for lakhs of devotees who used to walk bare feet in gurudwaras, temples & other religious places in extreme summer when the temperature went above 75°C, so we made a corridor of Star Cool Shield on the marble floor, where people walked with cool & comfort. The best result was gained when the coating was of Star Cool Shield & lamination was of Star Paint Shield +. This coating remained intact despite the visit by 1 Lakh visitors and multiple cleansing of the marble daily.
COMPLETE PROTECTION
-
The liquid membrane of Star Cool Shield not only gives protection from Heat but also helps you out with the prevention of leakage & even dampness.
-
Formulated with Non-yellowish & UV Block Technology. Star Cool Shield also doesn’t get affected by mild acid rain, soapy water &other liquids.
Certification & Recognition of StarShield
ENHANCES LIFE TIME OF ROOF
-
STAR COOL SHIELD
-
OTHER COATING
EXTRA PROTECTION WITH STAR PAINT SHIELD +
Star Cool Shield, a Nano Modified Dust & Water Repellent Anti Stain Clear Top Coat forms a Transparent Lamination on the painted surface and makes it Hard, Dust & Water Repellent, scratch & scrub resistant as well as self cleanable and very durable at an economical cost.
HIGHEST DIRT PICK-UP RESISTANCE
Button labelEXTRA PROTECTION WITH STAR PAINT SHIELD +
-
Star Cool Shield, a Nano Modified Dust & Water Repellent Anti Stain Clear Top Coat forms a Transparent Lamination on the painted surface and makes it Hard, Dust & Water Repellent, scratch & scrub resistant as well as self cleanable and very durable at an economical cost.
-
Where to apply?
-
ROOF TOP
-
FLOORS
-
INDUSTRIAL SHEDS
-
WATER TANKS
How to apply?...EASILY APPLY ANYWHERE IN SIMPLE STEPS
-
STEP-1
SCRUB & CLEAN THE SURFACE THOROUGHLY WITH A METAL BRUSH
-
STEP-2
WASH THE SURFACE WITH PLENTY OF WATER UNTIL IT STOPS ABSORBING
-
STEP-3
DILUTE 5-10% WITH WATER
-
STEP-4
APPLY TWO OR MORE COATS HORIZONTALLY & VERTICALLY WITH A ROLLER, BRUSH OR AIRLESS SPRAY