Hiding

Also known as: coverage, opacity, transparency

Description:When the filler, primer or sealer on the repair area is visible through the topcoat.

  • ORIGIN AND POTENTIAL CAUSES

    » Inadequate lighting in the spraybooth
    » Color was not well mixed/stirred
    » Too much thinner was used
    » Substrate’s color was not correct
    » Substrate not uniform (effect finishes)
    » Color coat has insufficient film thickness

  • PREVENTION TECHNIQUES

    » Use recommended thinner
    » Install good lighting equipment
    » Verify proper spray gun setup
    » Mix/stir all colors/tintings thoroughly
    » Use the appropriate ValueShade™
    undercoat
    » Spray sufficient color to obtain hiding

  • REMEDY

    » Allow the finish to properly dry, then sand and refinish.

Project Enquiry

Expert Help

Share your project details and we will connect with you shortly.

Tell us what you need

Our technical team will review your surface, location, and project details.