DrySpray

Description :Granular texture normally with no gloss at all. This defect is normally limited to small areas.

  • ORIGIN AND POTENTIAL CAUSES

    » Incorrect viscosity
    » Improper choice of thinner, reducer or activator; generally, too fast for spray conditions
    » Spraying too fast
    » Air pressure too high
    » Spray gun too far from surface while applying
    » Improper spray gun setup

  • PREVENTION TECHNIQUES

    » Follow recommendations on the Technical Data Sheet for mixing ratio and reduction, appropriate to spray conditions
    » Adjust spray gun settings, fluid feed, spray pattern
    » Use recommended air pressure

  • REMEDY

    » Allow the paint to dry and then sand.After sanding, and depending on the magnitude of the defect, respraying or polishing will be necessary

Expert Help