Adhesion Loss,Polyesters

Description: Loss of adhesion between the polyester filler and the substrate, resulting in detachment of the filler from the substrate.

  • ORIGIN AND POTENTIAL CAUSES

    » Substrate not carefully prepared
    » Polyester material unsuitable for galvanized substrate
    » Too high surface temperature during forced drying
    » Undercured filler - too much or too little hardener

  • PREVENTION TECHNIQUES

    » Clean and sand substrate thoroughly
    » Follow the manufacturer’s instructions for forced drying
    » Use proper mixing ratio of polyester materials
    » Ensure the hardener is thoroughly mixed

  • REMEDY

    » Sand the damaged repair area well
    » Redo the repair and refinish

Project Enquiry

Expert Help

Share your project details and we will connect with you shortly.

Tell us what you need

Our technical team will review your surface, location, and project details.